1/2'' 12mm PC12 Male Straight Push To Connect Plastic Pneumatic Hose Fittings
Pneumatic push-in fittings, also called push to connect fittings, provide a leak-free means of easily connecting hoses in your compressed air system. Fittings can have between 1-6 inlet/outlet ports or may have additional functionality such as an integrated pressure gauge or silencer.
Product Features:
1. High Strength, Wear Resistance, Corrosion Resistance, High Density, Not Easy to Burst.
2. The Product is Sturdy and Durable and Has a Long Service Life.
3. Easy Installation and Disassembly, Good Sealing Performance.
4. It Can be Used for The Connection of pipes and The Use of Different Pneumatic Components, and Has a Wide Range of Uses.
5. You Can Easily Insert or Pull out the Trachea Without Any Tools
6. The Clip of Connecting Air Pipe is Made of Strong Plastic Material, Which is Not Easy to Fall off After Connection Adopt Sealing Component, Keep Good Sealing, Not Easy to Leak.
7. Freely Change Pipeline Direction After Installation, Easy to Insert or Pull Trachea Manually Without Tools.
Dimension & Order Code of Pneumatic Hose Fittings:
Straight Male Fitting:
| Picture | Dimension | Part No. | R | D | L1 | L | S | Inner Hex |
 |  |
| PC4 | M5X0.8 | 4 | 6 | 22 | 10 | 3 |
| M6X1 | 4 | 6 | 22 | 10 | 3 |
| R1/8" | 4 | 8 | 21 | 12 | 3 |
| R1/4" | 4 | 9 | 18 | 13 | 3 |
| R3/8" | 4 | 10 | 20 | 17 | 3 |
| R1/2" | 4 | 11 | 22 | 21 | 3 |
| PC6 | M5X0.8 | 6 | 6 | 23 | 12 | 4 |
| M6X1 | 6 | 6 | 23 | 12 | 4 |
| R1/8" | 6 | 8 | 22 | 12 | 4 |
| R1/4" | 6 | 9 | 22 | 13 | 4 |
| R3/8" | 6 | 10 | 21 | 17 | 4 |
| R1/2" | 6 | 11 | 23 | 21 | 4 |
| PC8 | R1/8" | 8 | 8 | 27 | 14 | 4 |
| R1/4" | 8 | 9 | 24 | 14 | 6 |
| R3/8" | 8 | 10 | 22 | 17 | 6 |
| R1/2" | 8 | 11 | 23 | 21 | 6 |
| PC10 | R1/8" | 10 | 8 | 29 | 27 | 4 |
| R1/4" | 10 | 9 | 30 | 17 | 6 |
| R3/8" | 10 | 10 | 28 | 17 | 8 |
| R1/2" | 10 | 11 | 24 | 21 | 8 |
| PC12 | R1/8" | 12 | 8 | 31 | 19 | 4 |
| R1/2" | 12 | 9 | 32 | 19 | 6 |
| R3/8" | 12 | 10 | 29 | 19 | 10 |
| R1/2" | 12 | 11 | 31 | 21 | 10 |
Elbow Push Male Fitting:
| Picture | Dimension | Part No. | R | D | D1 | L1 | L | L' | S |
 |  |
| PL4 | M5X0.8 | 4 | 11 | 6 | 19 | 25 | 10 |
| M6X1 | 4 | 11 | 6 | 19 | 25 | 10 |
| R1/8" | 4 | 11 | 8 | 19 | 27 | 12 |
| R1/4" | 4 | 11 | 9 | 19 | 28 | 13 |
| R3/8" | 4 | 11 | 10 | 19 | 30 | 17 |
| R1/2" | 4 | 11 | 11 | 19 | 31 | 21 |
| PL6 | M5X0.8 | 6 | 13 | 6 | 20 | 26 | 12 |
| M6X1 | 6 | 13 | 6 | 20 | 26 | 12 |
| R1/8" | 6 | 13 | 8 | 20 | 28 | 12 |
| R1/4" | 6 | 13 | 9 | 20 | 29 | 13 |
| R3/8" | 6 | 13 | 10 | 20 | 31 | 17 |
| R1/2" | 6 | 13 | 11 | 20 | 32 | 21 |
| PL8 | R1/8" | 8 | 14 | 8 | 23 | 31 | 14 |
| R1/4" | 8 | 14 | 9 | 23 | 32 | 14 |
| R3/8" | 8 | 14 | 10 | 23 | 33 | 17 |
| R1/2" | 8 | 14 | 11 | 23 | 35 | 21 |
| PL10 | R1/8" | 10 | 18 | 8 | 27 | 35 | 27 |
| R1/4" | 10 | 18 | 9 | 27 | 36 | 17 |
| R3/8" | 10 | 18 | 10 | 27 | 37 | 17 |
| R1/2" | 10 | 18 | 11 | 27 | 39 | 21 |
| PL12 | R1/8" | 12 | 21 | 8 | 30 | 37 | 19 |
| R1/2" | 12 | 21 | 9 | 30 | 38 | 19 |
| R3/8" | 12 | 21 | 10 | 30 | 39 | 19 |
| R1/2" | 12 | 21 | 11 | 30 | 41 | 21 |
Branch Tee Male Fitting:
| Picture | Dimension | Part No. | R | D | D1 | L1 | L | L' | S |
 |  |
| PT4 | M5X0.8 | 4 | 11 | 6 | 19 | 25 | 10 |
| M6X1 | 4 | 11 | 6 | 19 | 25 | 10 |
| R1/8" | 4 | 11 | 8 | 19 | 27 | 12 |
| R1/4" | 4 | 11 | 9 | 19 | 28 | 13 |
| R3/8" | 4 | 11 | 10 | 19 | 30 | 17 |
| R1/2" | 4 | 11 | 11 | 19 | 31 | 21 |
| PT6 | M5X0.8 | 6 | 13 | 6 | 20 | 26 | 12 |
| M6X1 | 6 | 13 | 6 | 20 | 26 | 12 |
| R1/8" | 6 | 13 | 8 | 20 | 28 | 12 |
| R1/4" | 6 | 13 | 9 | 20 | 29 | 13 |
| R3/8" | 6 | 13 | 10 | 20 | 31 | 17 |
| R1/2" | 6 | 13 | 11 | 20 | 32 | 21 |
| PT8 | R1/8" | 8 | 14 | 8 | 23 | 31 | 14 |
| R1/4" | 8 | 14 | 9 | 23 | 32 | 14 |
| R3/8" | 8 | 14 | 10 | 23 | 33 | 17 |
| R1/2" | 8 | 14 | 11 | 23 | 35 | 21 |
| PT10 | R1/8" | 10 | 18 | 8 | 27 | 35 | 27 |
| R1/4" | 10 | 18 | 9 | 27 | 36 | 17 |
| R3/8" | 10 | 18 | 10 | 27 | 37 | 17 |
| R1/2" | 10 | 18 | 11 | 27 | 39 | 21 |
| PT12 | R1/8" | 12 | 21 | 8 | 30 | 37 | 19 |
| R1/2" | 12 | 21 | 9 | 30 | 38 | 19 |
| R3/8" | 12 | 21 | 10 | 30 | 39 | 19 |
| R1/2" | 12 | 21 | 11 | 30 | 41 | 21 |
List of All Plastic Pneumatic Hose Fittings:
FAQ:
1. How to install pneumatic push-in fittings?
The hose is easy to install by pushing it into the release ring-end of the fitting until it stops. The internal lock claws will automatically clamp around the hose for an immediate and secure connection.
2. How to uninstall pneumatic push-in fittings?
Push the release ring inward towards the fitting to disengage the lock claws and pull back on the tubing to remove it. The opposite end may be another push to connect fitting, threaded male, threaded female or a threaded male with an inner hex-type connection. The threaded connections usually have a pre-applied thread lock coating.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
Product Tags:
|
|
1/2'' 12mm PC12 Male Straight Push To Connect Plastic Pneumatic Hose Fittings Images
|
