1/4'' 8mm Round Male Straight Quick Connect Pneumatic Hose Fittings
Push-in fittings are used in all types of compressed air systems, but are most commonly used in applications having pneumatic cylinders, tools, and equipment. They can be used for water applications, but extra measures have to be taken (controlled surge pressure, water compatibility, insert ring, etc.) The push on connection method allows for rapid changing of components, so it is ideal if you have one air source for multiple tools that can be exchanged out.
Features:
1. Fluid: Air, vacuum, water
2. Pressure Range: 0-1Mpa (120 psi)
3. Max pressure: 1.5 Mpa
4. Temperature Range: 0-60℃
5. Applicable Tube: PU / NYLON / Soft PE hose air fittings
Dimension & Order Code of Pneumatic Hose Fittings:
Straight Male Fitting:
| Picture | Dimension | Part No. | R | D | L1 | L | S | Inner Hex |
 |  |
| PC4 | M5X0.8 | 4 | 6 | 22 | 10 | 3 |
| M6X1 | 4 | 6 | 22 | 10 | 3 |
| R1/8" | 4 | 8 | 21 | 12 | 3 |
| R1/4" | 4 | 9 | 18 | 13 | 3 |
| R3/8" | 4 | 10 | 20 | 17 | 3 |
| R1/2" | 4 | 11 | 22 | 21 | 3 |
| PC6 | M5X0.8 | 6 | 6 | 23 | 12 | 4 |
| M6X1 | 6 | 6 | 23 | 12 | 4 |
| R1/8" | 6 | 8 | 22 | 12 | 4 |
| R1/4" | 6 | 9 | 22 | 13 | 4 |
| R3/8" | 6 | 10 | 21 | 17 | 4 |
| R1/2" | 6 | 11 | 23 | 21 | 4 |
| PC8 | R1/8" | 8 | 8 | 27 | 14 | 4 |
| R1/4" | 8 | 9 | 24 | 14 | 6 |
| R3/8" | 8 | 10 | 22 | 17 | 6 |
| R1/2" | 8 | 11 | 23 | 21 | 6 |
| PC10 | R1/8" | 10 | 8 | 29 | 27 | 4 |
| R1/4" | 10 | 9 | 30 | 17 | 6 |
| R3/8" | 10 | 10 | 28 | 17 | 8 |
| R1/2" | 10 | 11 | 24 | 21 | 8 |
| PC12 | R1/8" | 12 | 8 | 31 | 19 | 4 |
| R1/2" | 12 | 9 | 32 | 19 | 6 |
| R3/8" | 12 | 10 | 29 | 19 | 10 |
| R1/2" | 12 | 11 | 31 | 21 | 10 |
Elbow Push Male Fitting:
| Picture | Dimension | Part No. | R | D | D1 | L1 | L | L' | S |
 |  |
| PL4 | M5X0.8 | 4 | 11 | 6 | 19 | 25 | 10 |
| M6X1 | 4 | 11 | 6 | 19 | 25 | 10 |
| R1/8" | 4 | 11 | 8 | 19 | 27 | 12 |
| R1/4" | 4 | 11 | 9 | 19 | 28 | 13 |
| R3/8" | 4 | 11 | 10 | 19 | 30 | 17 |
| R1/2" | 4 | 11 | 11 | 19 | 31 | 21 |
| PL6 | M5X0.8 | 6 | 13 | 6 | 20 | 26 | 12 |
| M6X1 | 6 | 13 | 6 | 20 | 26 | 12 |
| R1/8" | 6 | 13 | 8 | 20 | 28 | 12 |
| R1/4" | 6 | 13 | 9 | 20 | 29 | 13 |
| R3/8" | 6 | 13 | 10 | 20 | 31 | 17 |
| R1/2" | 6 | 13 | 11 | 20 | 32 | 21 |
| PL8 | R1/8" | 8 | 14 | 8 | 23 | 31 | 14 |
| R1/4" | 8 | 14 | 9 | 23 | 32 | 14 |
| R3/8" | 8 | 14 | 10 | 23 | 33 | 17 |
| R1/2" | 8 | 14 | 11 | 23 | 35 | 21 |
| PL10 | R1/8" | 10 | 18 | 8 | 27 | 35 | 27 |
| R1/4" | 10 | 18 | 9 | 27 | 36 | 17 |
| R3/8" | 10 | 18 | 10 | 27 | 37 | 17 |
| R1/2" | 10 | 18 | 11 | 27 | 39 | 21 |
| PL12 | R1/8" | 12 | 21 | 8 | 30 | 37 | 19 |
| R1/2" | 12 | 21 | 9 | 30 | 38 | 19 |
| R3/8" | 12 | 21 | 10 | 30 | 39 | 19 |
| R1/2" | 12 | 21 | 11 | 30 | 41 | 21 |
Branch Tee Male Fitting:
| Picture | Dimension | Part No. | R | D | D1 | L1 | L | L' | S |
 |  |
| PT4 | M5X0.8 | 4 | 11 | 6 | 19 | 25 | 10 |
| M6X1 | 4 | 11 | 6 | 19 | 25 | 10 |
| R1/8" | 4 | 11 | 8 | 19 | 27 | 12 |
| R1/4" | 4 | 11 | 9 | 19 | 28 | 13 |
| R3/8" | 4 | 11 | 10 | 19 | 30 | 17 |
| R1/2" | 4 | 11 | 11 | 19 | 31 | 21 |
| PT6 | M5X0.8 | 6 | 13 | 6 | 20 | 26 | 12 |
| M6X1 | 6 | 13 | 6 | 20 | 26 | 12 |
| R1/8" | 6 | 13 | 8 | 20 | 28 | 12 |
| R1/4" | 6 | 13 | 9 | 20 | 29 | 13 |
| R3/8" | 6 | 13 | 10 | 20 | 31 | 17 |
| R1/2" | 6 | 13 | 11 | 20 | 32 | 21 |
| PT8 | R1/8" | 8 | 14 | 8 | 23 | 31 | 14 |
| R1/4" | 8 | 14 | 9 | 23 | 32 | 14 |
| R3/8" | 8 | 14 | 10 | 23 | 33 | 17 |
| R1/2" | 8 | 14 | 11 | 23 | 35 | 21 |
| PT10 | R1/8" | 10 | 18 | 8 | 27 | 35 | 27 |
| R1/4" | 10 | 18 | 9 | 27 | 36 | 17 |
| R3/8" | 10 | 18 | 10 | 27 | 37 | 17 |
| R1/2" | 10 | 18 | 11 | 27 | 39 | 21 |
| PT12 | R1/8" | 12 | 21 | 8 | 30 | 37 | 19 |
| R1/2" | 12 | 21 | 9 | 30 | 38 | 19 |
| R3/8" | 12 | 21 | 10 | 30 | 39 | 19 |
| R1/2" | 12 | 21 | 11 | 30 | 41 | 21 |
List of All Plastic Pneumatic Hose Fittings:
FAQ:
1. How to install pneumatic push-in fittings?
The hose is easy to install by pushing it into the release ring-end of the fitting until it stops. The internal lock claws will automatically clamp around the hose for an immediate and secure connection.
2. How to uninstall pneumatic push-in fittings?
Push the release ring inward towards the fitting to disengage the lock claws and pull back on the tubing to remove it. The opposite end may be another push to connect fitting, threaded male, threaded female or a threaded male with an inner hex-type connection. The threaded connections usually have a pre-applied thread lock coating.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
Product Tags:
|
|
1/4'' 8mm Round Male Straight Quick Connect Pneumatic Hose Fittings Images
|
